Hình ảnh chỉ có giá trị minh họa, có thể khác sản phẩm thực tế.
Dụng cụ ren ống 1224 26092
FEATURES
The Model 1224 threads a wide range of pipe including black, galvanized and plastic-coated pipe, together with stainless steel, IMC and heavy-wall conduit, as well as rod up to 30 Rockwell C.
An induction motor helps minimize noise.
A special capacitor-start / capacitor-run motor allows the 1224 to thread a full range of material where voltage drop is experienced.
1/4"-2" Universal Die Head; 2 1/2"-4" receding die head allows cutting of tapered or straight NPT/NPSM or BSPT/BSPP threads.
Constant and proper lubrication of dies and workpiece with through-head oiling.
SPECIFICATIONS
Nominal Pipe Capacity 1/4"-2" (6mm-100mm) @ 36 RPM, 2-1/2"-4" (65mm-100mm) @ 12 RPM, 4"-6" (100mm-150mm) with 161 Geared Threader.
Bolt Capacity 1/4"-2" (6mm-50mm).
Motor Control Reverse/off/forward, heavy-duty rotary-type and integral foot switch.
Gear Box Two-speed gear box with a 3:1 ratio.
Chuck Hammer-type with replaceable rocker-action jaw inserts.
Rear Centering Device Cam action.
Oiling Pump Self-priming, gerotor-type, automatic-reversing, constant-flow.
Oiling Through die head
Standard Equipment
26132 - Diehead, 711, SO Univ. L/Dies
26152 - Diehead, 714 SO Recd L/Dies
26192 - Dies. 1224 2 - 1/2" - 4 NPT HS
47745 - 1/2" - 3/4" Universal Alloy Die Set
47750 - 1" - 2" Universal Alloy Die Set
26212 - 1/4"-4" Wheel-Type Cutter
26217 - 1/4"-4" Blade-Type Reamer
33125 - Wheel, Cutter F229 3 & 4 HD
46030 - 3/16" Hex Key
46040 - Key, Hex 7/32
46190 - 1/4" Hex Key
70835 - Nu-Clear Oil
83975 - Wrench, 3/4 COMB
FEATURES
The Model 1224 threads a wide range of pipe including black, galvanized and plastic-coated pipe, together with stainless steel, IMC and heavy-wall conduit, as well as rod up to 30 Rockwell C.
An induction motor helps minimize noise.
A special capacitor-start / capacitor-run motor allows the 1224 to thread a full range of material where voltage drop is experienced.
1/4"-2" Universal Die Head; 2 1/2"-4" receding die head allows cutting of tapered or straight NPT/NPSM or BSPT/BSPP threads.
Constant and proper lubrication of dies and workpiece with through-head oiling.
SPECIFICATIONS
Nominal Pipe Capacity 1/4"-2" (6mm-100mm) @ 36 RPM, 2-1/2"-4" (65mm-100mm) @ 12 RPM, 4"-6" (100mm-150mm) with 161 Geared Threader.
Bolt Capacity 1/4"-2" (6mm-50mm).
Motor Control Reverse/off/forward, heavy-duty rotary-type and integral foot switch.
Gear Box Two-speed gear box with a 3:1 ratio.
Chuck Hammer-type with replaceable rocker-action jaw inserts.
Rear Centering Device Cam action.
Oiling Pump Self-priming, gerotor-type, automatic-reversing, constant-flow.
Oiling Through die head
Standard Equipment
26132 - Diehead, 711, SO Univ. L/Dies
26152 - Diehead, 714 SO Recd L/Dies
26192 - Dies. 1224 2 - 1/2" - 4 NPT HS
47745 - 1/2" - 3/4" Universal Alloy Die Set
47750 - 1" - 2" Universal Alloy Die Set
26212 - 1/4"-4" Wheel-Type Cutter
26217 - 1/4"-4" Blade-Type Reamer
33125 - Wheel, Cutter F229 3 & 4 HD
46030 - 3/16" Hex Key
46040 - Key, Hex 7/32
46190 - 1/4" Hex Key
70835 - Nu-Clear Oil
83975 - Wrench, 3/4 COMB
Thông số sản phẩm
| Loại ren NPT (1)/ BSPT (0) | 2 NPT |
Danh sách phụ kiện
KHÁCH HÀNG MUA SẢN PHẨM NÀY THƯỜNG MUA
3,510,000đ(chưa VAT)
Còn hàng
20,852,000đ(chưa VAT)
Tạm hết hàng
15,871,000đ(chưa VAT)
Tạm hết hàng
5,233,000đ(chưa VAT)
Còn hàng
Đánh giá & Bình luận
Ðánh Giá Trung Bình
5